The moon’s terminator is the dividing line marking the edge between day and night on the moon. It’s sometimes called the twilight zone, because it marks where the sun is either rising or setting, putting the moon’s landscape there in a twilight state. Want to see lunar features more clearly through binoculars or a small telescope? Look along the terminator line. That’s where the contrast between light and shadow reveals the moon’s topography in stark relief. Mountains tower over the lunar regolith – the loose dust, broken rocks and other materials covering most of the moon’s surface – while craters sink away from their rocky ledges.
The terminator line in motion
The terminator isn’t fixed on the moon, of course. It creeps across the moon’s surface, with the change in its location noticeable in just hours to those peering through telescopes. A day on the moon lasts 29.5 Earth-days. The moon’s terminator moves a bit slower than 10 miles per hour (16 kph) across the moon’s surface. That pace seems almost glacial when you consider that, for those at the equator on Earth, our world’s terminator flashes across its surface at about 1,000 mph (1,600 kph).
If you set your treadmill at a 10-mile-per-hour (16 kph) pace to reflect the speed of the moon’s terminator, you could jog (or, more likely, run) and see if you’d be able to keep up with the sweep of nightfall across the moon. You’d have to run at a pace that equals about a 6-minute and 15-second mile. (For reference, if you could run that fast for 26.2 miles, you would be considered an elite marathon runner).
The terminator and phases of the moon
As we see it from Earth, the moon’s terminator marks the line of lunar sunsets or sunrises. As the moon orbits eastward around Earth, the sunrise terminator crosses our satellite. This creates the familiar phases we recognize as waxing crescent, first quarter, waxing gibbous and finally full. On a full moon, we see no terminator at all, because the side of the moon facing us is completely lit. After the full stage, the sunset terminator takes the moon through the phases in reverse. The phases run from waning gibbous, last quarter, and waning crescent to new moon, when no light illuminates the surface.
Seasoned astronomers know that observing the moon during its full stage is a washout. The moon is super bright, its surface brilliant but bland, and your night vision is ruined by peering through a telescope at such a blazing light. On the other hand, the waning and waxing moon phases provide a detailed study of the moon’s surface one night at a time over the course of two weeks.
The Straight Wall
One popular feature that is seen in its “best light” by the terminator is the lunar Straight Wall. The Straight Wall, also known as Rupes Recta, is a fault line that lies inside Mare Nubium, a basin in the southern portion of the moon. The Straight Wall is one of those details on the moon that can all but disappear except for when the terminator highlights its striking shadow on the eighth day past new moon. If you hunted down Rupes Recta and it was a cinch to find, try for the smaller Rima Birt running parallel nearby.
Lunar features best on the terminator
Even the more obvious lunar features, such as large craters, benefit from viewing them when the terminator will pass over them. For example, the craters Copernicus and Eratosthenes to Montes Apenninus show their elevation best in contrasting light.
Terminator line on other bodies
But wait! The moon isn’t the only solar system object to display a terminator.
Any planet and satellite with an external source of light, such as the sun, can display a terminator.
Inferior planets, those that are inside Earth’s orbit, more markedly show the terminator and phases. So, for example, on Earth we can see Venus and Mercury’s phases. And any Martians on Mars can see Earth’s phases and its terminator line.
Amateur astronomers are familiar with the phases of Venus, because they are readily visible through binoculars or a telescope. Venus’s disk looks larger and like a crescent when it’s closer to Earth. It looks smaller and like a gibbous phase when it’s farther away.
Mercury’s nearness to the sun means that the solar wind has blown away its atmosphere. Therefore, the terminator line’s separation between day and night causes a severe swing in temperature. When the sun beats down on the daytime side of Mercury, temperatures at the surface soar to 800 degrees Fahrenheit (430 Celsius). But just across the terminator’s border on the night side, temperatures plummet to -290 Fahrenheit (-180 Celsius).
Bottom line: The moon’s terminator line divides day and night on the moon. As we see it from Earth, it marks the line of lunar sunsets or sunrises. Other objects, including Earth, have a terminator line.
The post The moon’s terminator line divides night and day first appeared on EarthSky.
from EarthSky https://ift.tt/7B1zjbC
The moon’s terminator is the dividing line marking the edge between day and night on the moon. It’s sometimes called the twilight zone, because it marks where the sun is either rising or setting, putting the moon’s landscape there in a twilight state. Want to see lunar features more clearly through binoculars or a small telescope? Look along the terminator line. That’s where the contrast between light and shadow reveals the moon’s topography in stark relief. Mountains tower over the lunar regolith – the loose dust, broken rocks and other materials covering most of the moon’s surface – while craters sink away from their rocky ledges.
The terminator line in motion
The terminator isn’t fixed on the moon, of course. It creeps across the moon’s surface, with the change in its location noticeable in just hours to those peering through telescopes. A day on the moon lasts 29.5 Earth-days. The moon’s terminator moves a bit slower than 10 miles per hour (16 kph) across the moon’s surface. That pace seems almost glacial when you consider that, for those at the equator on Earth, our world’s terminator flashes across its surface at about 1,000 mph (1,600 kph).
If you set your treadmill at a 10-mile-per-hour (16 kph) pace to reflect the speed of the moon’s terminator, you could jog (or, more likely, run) and see if you’d be able to keep up with the sweep of nightfall across the moon. You’d have to run at a pace that equals about a 6-minute and 15-second mile. (For reference, if you could run that fast for 26.2 miles, you would be considered an elite marathon runner).
The terminator and phases of the moon
As we see it from Earth, the moon’s terminator marks the line of lunar sunsets or sunrises. As the moon orbits eastward around Earth, the sunrise terminator crosses our satellite. This creates the familiar phases we recognize as waxing crescent, first quarter, waxing gibbous and finally full. On a full moon, we see no terminator at all, because the side of the moon facing us is completely lit. After the full stage, the sunset terminator takes the moon through the phases in reverse. The phases run from waning gibbous, last quarter, and waning crescent to new moon, when no light illuminates the surface.
Seasoned astronomers know that observing the moon during its full stage is a washout. The moon is super bright, its surface brilliant but bland, and your night vision is ruined by peering through a telescope at such a blazing light. On the other hand, the waning and waxing moon phases provide a detailed study of the moon’s surface one night at a time over the course of two weeks.
The Straight Wall
One popular feature that is seen in its “best light” by the terminator is the lunar Straight Wall. The Straight Wall, also known as Rupes Recta, is a fault line that lies inside Mare Nubium, a basin in the southern portion of the moon. The Straight Wall is one of those details on the moon that can all but disappear except for when the terminator highlights its striking shadow on the eighth day past new moon. If you hunted down Rupes Recta and it was a cinch to find, try for the smaller Rima Birt running parallel nearby.
Lunar features best on the terminator
Even the more obvious lunar features, such as large craters, benefit from viewing them when the terminator will pass over them. For example, the craters Copernicus and Eratosthenes to Montes Apenninus show their elevation best in contrasting light.
Terminator line on other bodies
But wait! The moon isn’t the only solar system object to display a terminator.
Any planet and satellite with an external source of light, such as the sun, can display a terminator.
Inferior planets, those that are inside Earth’s orbit, more markedly show the terminator and phases. So, for example, on Earth we can see Venus and Mercury’s phases. And any Martians on Mars can see Earth’s phases and its terminator line.
Amateur astronomers are familiar with the phases of Venus, because they are readily visible through binoculars or a telescope. Venus’s disk looks larger and like a crescent when it’s closer to Earth. It looks smaller and like a gibbous phase when it’s farther away.
Mercury’s nearness to the sun means that the solar wind has blown away its atmosphere. Therefore, the terminator line’s separation between day and night causes a severe swing in temperature. When the sun beats down on the daytime side of Mercury, temperatures at the surface soar to 800 degrees Fahrenheit (430 Celsius). But just across the terminator’s border on the night side, temperatures plummet to -290 Fahrenheit (-180 Celsius).
Bottom line: The moon’s terminator line divides day and night on the moon. As we see it from Earth, it marks the line of lunar sunsets or sunrises. Other objects, including Earth, have a terminator line.
The post The moon’s terminator line divides night and day first appeared on EarthSky.
from EarthSky https://ift.tt/7B1zjbC
Aucun commentaire:
Enregistrer un commentaire