Coronavirus genome like a shipping label that lets epidemiologists track where it’s been


Map of the world with large circles at pandemic hot spots and criss-crossed with multi-colored lines.

The steady rate of genetic changes lets researchers recreate how a virus has travelled. Image via nextstrain.org.

By Bert Ely, University of South Carolina and Taylor Carter, University of South Carolina

Following the coronavirus’s spread through the population – and anticipating its next move – is an important part of the public health response to the new disease, especially since containment is our only defense so far.

Just looking at an infected person doesn’t tell you where their version of the coronavirus came from, and SARS-CoV-2 doesn’t have a bar code you can scan to allow you to track its travel history. However, its genetic sequence is almost as good for providing some insight into where the virus has been.

An organism’s genome is its complete genetic instructions. You can think of a genome as a book, containing words made up of letters. Each “letter” in the genome is a molecule called a nucleotide – in shorthand, an A, G, C, T or U.

Mutations can occur every time the virus replicates its genome, so that over time mutations accumulate in the viral genome. For example, in place of the “word” CAT, the new virus has GAT. The virus carries these minor modifications as it moves from one person to the next host.

These mutations behave like a passport stamp. No matter where you go next, previous stamps in your passport still show where you’ve been.

Molecular geneticists like us can use this information to construct family trees for the coronavirus. That allows us to trace the routes the virus has traveled through space and time and start to answer questions like how quickly and easily does it spread from one person to another?

View through window in door of white-suited person working next to large white cabinets in a sealed room.

In early February, a laboratory technician works on virus samples from patients sick in Wuhan, China. Image via STR/ AFP/ Getty Images

Individual patient data help paint a big picture

Online databases have been collecting SARS-CoV-2 genomic nucleotide sequences since mid-December. Whenever a patient tests positive for SARS-CoV-2, a lab can determine the genome sequence of the infecting virus and upload it. As of late April 2020 more than 1,500 genome sequence samples have been deposited in GenBank, a publicly available database run by the National Institutes of Health, and more than 3,000 are in GISAID, the open-access Global Initiative on Sharing All Influenza Data.

Since each sequence is from a patient who is in a specific place in the world, these viral genome sequences allow scientists to compare them and track where the virus has been. The more similar the sequences from two particular viruses are, the more closely related they are and the more recently they’ve shared a common ancestor. The first SARS-CoV-2 genomic sequence uploaded to the GISAID’s website was collected from a patient in early December 2019.

Of course, the viral mutations themselves do not tell researchers which country they happened in. But since the databases record where particular patterns of mutations have been observed, scientists can determine the route that each viral strain has taken. The global map tracks the movement of the virus around the world.

The data recorded from thousands of patients show that SARS-Cov-2 originated in Wuhan, China, and spread from there to the rest of the world.

sideways branching multicolored tree with many colored dots along the branches.

The SARS-CoV-2 phylogenetic tree, the family tree that connects all the sequenced coronavirus samples worldwide. The colors denote regional ‘branches’ of the tree. Image via nextstrain.org.

Building maps out of sequences

The genetic data can play a big role in cracking public health mysteries, like how the coronavirus has spread through the United States.

For example, a traveler from Wuhan arrived in Seattle on January 15 and tested positive for the virus on January 20.

On February 28, scientists sequenced a virus sample from an American patient in Seattle and found its mutation signature matched that of the virus from the Wuhan traveler, plus three new mutations. GISAID has estimated the mutation rate at about 0.45 mutations per genome per week – so three mutations between the January 20 case and the February 28 case fits that rate.

Based on the three new mutations, this version of the virus had been multiplying undetected for about five weeks in the Seattle area. Since each infected person can infect several other people without experiencing any symptoms themselves, the virus could have spread to more than 100 people in five weeks.

Using the genome sequences to link the virus from the January 15 traveler from Wuhan with the Washington-based patient from the end of February alerted Washington state officials that the virus was silently spreading through the population. This undetected spreading of the virus in Seattle and elsewhere is one of the primary reasons public health officials are calling for the public to stay home as much as possible.

Another study detailed the path the virus took as it moved from Wuhan to Shanghai to Germany to Italy to Mexico, stowing away in infected travelers. This study tracked infected individuals and compared their viral genomic sequences. Since researchers could compare the viral mutations to those in known locations at specific times, they were able to map out the phylogenetic tree, the family tree that shows how the various virus genome sequences are related.

Using the GISAID estimated mutation rate and the phylogenetic tree, scientists think the first time the coronavirus infected a person likely occurred in Wuhan in November or early December 2019.

If the virus had been around much longer, the viruses of the first known patients would have had a larger variety of mutations than they did.

Airport concourse with travelers and two police officers.

The coronavirus can travel the world by hitching a ride in an infected traveler. Image via Anadolu Agency/ Getty Images.

Still tracking and learning from the sequences

The analysis of viral genomic sequences will continue to be a valuable tool for tracking and containing the spread of SARS-CoV-2.

For instance, sequencing the genome of a virus from a newly infected patient could tell you if it is a virus that has been circulating in the area for a while, or if it is a new introduction from elsewhere.

Someone who’d been in northern Italy before travel restrictions were in place brought the virus to Iceland. That initial outbreak was contained fairly quickly, but then new forms of the virus were introduced from elsewhere in Europe.

A new study pending peer-review indicates that California also had multiple introduction events with distinct viral lineages. For California, knowledge of the frequency of new introductions would be an important factor to consider as officials devise ways to contain the virus.

Viral genome sequences can be informative in other ways as well. Eventually, researchers may find that some forms of the virus are more virulent than others. In that case, the sequence of the viral genome could help physicians decide which treatment would be best for a particular patient.

Bottom line: Every time the coronavirus copies itself, it makes mistakes, creating a trail that researchers can use to build a family tree with information about where it’s traveled, and when.

Bert Ely, Professor of Biological Sciences, University of South Carolina and Taylor Carter, Ph.D. Student in Biological Sciences, University of South Carolina

This article is republished from The Conversation under a Creative Commons license. Read the original article.

The Conversation



from EarthSky https://ift.tt/3f4NomT
Map of the world with large circles at pandemic hot spots and criss-crossed with multi-colored lines.

The steady rate of genetic changes lets researchers recreate how a virus has travelled. Image via nextstrain.org.

By Bert Ely, University of South Carolina and Taylor Carter, University of South Carolina

Following the coronavirus’s spread through the population – and anticipating its next move – is an important part of the public health response to the new disease, especially since containment is our only defense so far.

Just looking at an infected person doesn’t tell you where their version of the coronavirus came from, and SARS-CoV-2 doesn’t have a bar code you can scan to allow you to track its travel history. However, its genetic sequence is almost as good for providing some insight into where the virus has been.

An organism’s genome is its complete genetic instructions. You can think of a genome as a book, containing words made up of letters. Each “letter” in the genome is a molecule called a nucleotide – in shorthand, an A, G, C, T or U.

Mutations can occur every time the virus replicates its genome, so that over time mutations accumulate in the viral genome. For example, in place of the “word” CAT, the new virus has GAT. The virus carries these minor modifications as it moves from one person to the next host.

These mutations behave like a passport stamp. No matter where you go next, previous stamps in your passport still show where you’ve been.

Molecular geneticists like us can use this information to construct family trees for the coronavirus. That allows us to trace the routes the virus has traveled through space and time and start to answer questions like how quickly and easily does it spread from one person to another?

View through window in door of white-suited person working next to large white cabinets in a sealed room.

In early February, a laboratory technician works on virus samples from patients sick in Wuhan, China. Image via STR/ AFP/ Getty Images

Individual patient data help paint a big picture

Online databases have been collecting SARS-CoV-2 genomic nucleotide sequences since mid-December. Whenever a patient tests positive for SARS-CoV-2, a lab can determine the genome sequence of the infecting virus and upload it. As of late April 2020 more than 1,500 genome sequence samples have been deposited in GenBank, a publicly available database run by the National Institutes of Health, and more than 3,000 are in GISAID, the open-access Global Initiative on Sharing All Influenza Data.

Since each sequence is from a patient who is in a specific place in the world, these viral genome sequences allow scientists to compare them and track where the virus has been. The more similar the sequences from two particular viruses are, the more closely related they are and the more recently they’ve shared a common ancestor. The first SARS-CoV-2 genomic sequence uploaded to the GISAID’s website was collected from a patient in early December 2019.

Of course, the viral mutations themselves do not tell researchers which country they happened in. But since the databases record where particular patterns of mutations have been observed, scientists can determine the route that each viral strain has taken. The global map tracks the movement of the virus around the world.

The data recorded from thousands of patients show that SARS-Cov-2 originated in Wuhan, China, and spread from there to the rest of the world.

sideways branching multicolored tree with many colored dots along the branches.

The SARS-CoV-2 phylogenetic tree, the family tree that connects all the sequenced coronavirus samples worldwide. The colors denote regional ‘branches’ of the tree. Image via nextstrain.org.

Building maps out of sequences

The genetic data can play a big role in cracking public health mysteries, like how the coronavirus has spread through the United States.

For example, a traveler from Wuhan arrived in Seattle on January 15 and tested positive for the virus on January 20.

On February 28, scientists sequenced a virus sample from an American patient in Seattle and found its mutation signature matched that of the virus from the Wuhan traveler, plus three new mutations. GISAID has estimated the mutation rate at about 0.45 mutations per genome per week – so three mutations between the January 20 case and the February 28 case fits that rate.

Based on the three new mutations, this version of the virus had been multiplying undetected for about five weeks in the Seattle area. Since each infected person can infect several other people without experiencing any symptoms themselves, the virus could have spread to more than 100 people in five weeks.

Using the genome sequences to link the virus from the January 15 traveler from Wuhan with the Washington-based patient from the end of February alerted Washington state officials that the virus was silently spreading through the population. This undetected spreading of the virus in Seattle and elsewhere is one of the primary reasons public health officials are calling for the public to stay home as much as possible.

Another study detailed the path the virus took as it moved from Wuhan to Shanghai to Germany to Italy to Mexico, stowing away in infected travelers. This study tracked infected individuals and compared their viral genomic sequences. Since researchers could compare the viral mutations to those in known locations at specific times, they were able to map out the phylogenetic tree, the family tree that shows how the various virus genome sequences are related.

Using the GISAID estimated mutation rate and the phylogenetic tree, scientists think the first time the coronavirus infected a person likely occurred in Wuhan in November or early December 2019.

If the virus had been around much longer, the viruses of the first known patients would have had a larger variety of mutations than they did.

Airport concourse with travelers and two police officers.

The coronavirus can travel the world by hitching a ride in an infected traveler. Image via Anadolu Agency/ Getty Images.

Still tracking and learning from the sequences

The analysis of viral genomic sequences will continue to be a valuable tool for tracking and containing the spread of SARS-CoV-2.

For instance, sequencing the genome of a virus from a newly infected patient could tell you if it is a virus that has been circulating in the area for a while, or if it is a new introduction from elsewhere.

Someone who’d been in northern Italy before travel restrictions were in place brought the virus to Iceland. That initial outbreak was contained fairly quickly, but then new forms of the virus were introduced from elsewhere in Europe.

A new study pending peer-review indicates that California also had multiple introduction events with distinct viral lineages. For California, knowledge of the frequency of new introductions would be an important factor to consider as officials devise ways to contain the virus.

Viral genome sequences can be informative in other ways as well. Eventually, researchers may find that some forms of the virus are more virulent than others. In that case, the sequence of the viral genome could help physicians decide which treatment would be best for a particular patient.

Bottom line: Every time the coronavirus copies itself, it makes mistakes, creating a trail that researchers can use to build a family tree with information about where it’s traveled, and when.

Bert Ely, Professor of Biological Sciences, University of South Carolina and Taylor Carter, Ph.D. Student in Biological Sciences, University of South Carolina

This article is republished from The Conversation under a Creative Commons license. Read the original article.

The Conversation



from EarthSky https://ift.tt/3f4NomT

Aucun commentaire:

Enregistrer un commentaire